If there was only one e-mountain bike in the world, the JAM² 6.7 would be the one for you. It’s the manifestation of a trail bike, supercharging your confidence on any trail – up or down. With its balanced and confidence-inspiring nature, the JAM² 6.7 bridges the gap between its FOCUS siblings on both ends of the e-MTB spectrum. If you want to feel the sensation of a Rider’s High on your home turf as well as big backcountry trail missions, then look no further.The trail bike rolling on 29″ wheels is available with either 800 Wh battery. Both batteries fit the frame with only a different down tube cover – no modification needed. Also, all frames in all sizes are compatible with the 250 Wh range extender, leading to four possible battery configurations from 600 to whooping 1050 Wh. The JAM² 6.7 is your e-MTB for unlimited trail fun, up and down.
Features – Focus JAM² 6.7
Aluminium frame with Bosch Performance Line CX e-drive 800 Wh battery
All the playfulness you need for a massive grin
The balanced geometry of the JAM² 6.7 gives you unlimited trail fun, up and down. It handles intuitively downhill, while uphill you can tackle any climb thanks to even weight distribution and plenty of traction on the front wheel. Countless hours of test riding have gone into the specific tune of the JAM² . As a result, the JAM² 6.7’s shock tune is as firm, reactive and sporty as it gets without compromising on traction. You can find our recommendations for the perfect suspension set-up in the FAQ on the JAM² family page.
Full controll when things get dicey
If you ride the JAM² 6.7 hard, close calls are unavoidable. Soft, 2.6-inch-wide trail tyres with a strong casing and powerful brakes paired with 200 mm brake discs enable you to ride at full speed with peace of mind. And even off the trail, you have full control and always know where your bike is thanks to the integrated mounting options for an Airtag or Chipolo.
The battery size that’s right for you
The JAM² 6.7 is available with both the compact 600 Wh battery and the larger 800 Wh battery. Both are removable and differ only in appearance, with a larger cover for the down tube. Please ask your local FOCUS dealer for more information. In addition, the JAM² 6.7 is compatible with the 250 Wh range extender in all sizes. That adds up to four battery configurations ranging from 600 to a whopping 1050 Wh. This means you’ll always have enough juice for the renowned and reliable Bosch Performance Line CX e-drive – and maximum trail fun.
Unlimited trail fun, up and down If there was only one e-mountainbike in the world, the JAM² would be the one for you. It is the epitome of a trail bike that will boost your confidence on every trail – uphill and downhill. With its balanced nature that boosts your confidence, the JAM² bridges the gap between its FOCUS siblings at both ends of the E-MTB spectrum. If you want the feeling of a rider’s high both on your home turf and on big backcountry trail missions, then look no further. The JAM² is your E-MTB for limitless trail fun, uphill and downhill.
Choose the right battery for your trail fun More battery is not always better. At least that’s what Focus think. But this much can already be said: The JAM² offers more than enough options of battery capacity that you can focus on trail fun entirely. Focus chooses compact 600 Wh battery, pivot battery removal and a slim silhouette as the main design for the JAM².
Renowned reliable Bosch Power Gen. 5 of the Bosch Performance Line CX motor is as reliable as ever – if not more so. You probably have a pretty good idea of what you can expect already. The Bosch Performance Line CX has your back in every situation. So that nothing, not even rattling noises on trails, can stand in the way of your peace of mind and maximum trail fun. And of course, everything is Smart System compatible and all JAM² models come with a proper display.
Premium Look Oh, that’s not a carbon bike? You are probably not alone in realising this if you have only looked at the sleek cockpit section. With ground and levelled weld seams in the head tube area and around the semi-integrated shock mount, the JAM² and its upcoming siblings, the new THRON² and FOCUS SAM², could easily be mistaken for carbon bikes. Add the elegant two-tone metallic paint finish including a painted main link as well as the C.I.S. 2.0 stem and voilà, the JAM² is ready and above all très chic!
Details that matter and make it Focus has also thought of the many important details with the JAM². The particularly thick chainstay guard makes the bike quieter than ever. The motor cover is impressively robust. Ho wever, the JAM² has so much ground clearance anyway that the bike testers had difficulty finding sufficiently large steps for the test at the limit. Plus, the cover for the charging socket on the seat tube does not flap.
Das neue JAM² | UP YOUR GAME ON ANY TRAIL | FOCUS Bikes
7005 hydroformed aluminium, 150 mm F.O.L.D. kinematics, 148×12 mm thru axle, Post Mount 180 mm
Frame material:
aluminium
Wheel size:
29″
Speeds:
1 x 10
Colour:
Slategrey / Magicblack
Fork:
Rock Shox Psylo Silver RC, 160 mm
Rear Shock:
Rock Shox Deluxe Select, DebonAir+, 150 mm
Travel:
160mm / 150mm
Brakes:
Tektro Gemini SL, 4-piston* / Sram DB8, 4-piston*
Brake discs:
203mm / 203mm
Headset:
ACROS ZS56/ZS66 (ICR), FOCUS C.I.S. Integrated
Stem:
FOCUS C.I.S. 2.0, 40 mm
Handlebar:
Alloy, width: 800 mm, rise: 30 mm
Bar grips:
VP Lock-On Grips
Saddle:
Selle Italia X3 Boost
Seatpost:
Post Moderne DP-212, S / M /L / XL: 125 / 170 / 170 / 200 mm, 34,9 mm
Crankset:
Samox, 165 mm, Samox, 36 T
Rear derailleur:
Shimano Cues, 10-speed
Gear shifters:
Shimao Cues
Chain:
Shimano CN-LG500
Front tyre:
Maxxis Minion DHF, TLE, EXO, 29 x 2,5″
Rear tyre:
Maxxis Minion DHF, TLE, EXO, 29 x 2,5″
Front hub:
Shimano HB-TC500
Rear hub:
Shimano FH-TC500
Spokes :
WTB STi30, alloy, 29″
Display:
Bosch Purion 200
Battery:
Bosch PowerTube Li-Ion (800 Wh)
Engine:
Bosch Performance CX Gen5 Smart System, 85 Nm
Other details:
Tool bag (exluding size S & M), Hidden AirTag or Chipolo holder
Maximum total weight allowed:
150 kg (body weight + bike + equipment)
Weight:
starting from 25,6 kg
Drivetrain
What components does the smart system from Bosch consist of?
Bosch Drive Unit Performance Line CX Motor Generation 5
The Performance Line CX Gen.5 (BDU384Y) motor takes riding dynamics and agility to a new level. It is powerful, light and quiet. Ten years of experience and countless trail rides around the world have gone into its further development. The Performance Line CX motor combines power, dynamics, efficiency and reach. 85-600-340: 85Nm max. torque, 600W max. motor power, 340% max. support factor. These values represent the ideal balance between performance and riding pleasure in relation to wear and tear and range.
Powerful uphill
The maximum torque of 85 Nm has a noticeable effect on your riding performance when eMountain biking. The powerful motor enables powerful acceleration after tight bends and obstacles at a low cadence and simplifies hill starts. For fast sprints, the motor also supports you at high cadences.
Intuitive handling
One mode for more focus: The eMTB mode, specially designed for sporty use, gives you optimum control and intuitive handling, as you don’t have to switch between the different riding modes as often. With this clever eMTB mode function, technical passages can be ridden with confidence and obstacles such as roots and thick branches can be easily overcome with targeted pedal pressure using the Extended Boost. The Performance Line CX drive unit ensures even more riding fun and a flow experience that sets new standards.
Maximum agility
The multi-sensor concept enables controlled and agile riding even on technically demanding trails, combined with the innovative Bosch motor control, it stands for maximum dynamics and sensitivity.
Sporty and economical
Sporty riding on a trekking bike or eMTB: With the Tour+ riding mode of the Bosch Performance Line CX, the focus is always on riding enjoyment. It eliminates the need to switch between support modes so that you can concentrate fully on eBiking. With Tour+ mode, you pedal harder on flat stretches than in Tour mode and are more sporty on the road – the riding mode therefore saves power and extends your radius – for even more riding fun! Trail or asphalt – Tour+ mode always suits you. Because it constantly adapts to you. Sensors on the motor measure important riding data more than 1,000 times per second, from which the Tour+ mode derives the optimum support for you. It regulates the additional power so sensitively that you not only get a natural riding experience, but also a greater range with greater power input.
Individual riding experience
The available riding modes can be individually set in the eBike Flow app so that the eBike’s riding characteristics match your own riding style or the route you have chosen. The level of assistance, dynamics, maximum speed and maximum torque of the drive can thus be flexibly adjusted to your personal needs and requirements. Intensive training or an extended eBike tour – the riding modes always offer you the right support and enable even more riding enjoyment.
The Performance Line CX responds to your input more sensitively than ever before
Bosch has reinterpreted and improved the signals from the sensors. Inertial sensors (IMU), cadence sensor, torque sensor. The new motor does exactly what you want – sensitive, controlled and direct. That’s a natural riding experience
eMTB mode and Extended Boost
You don’t need any other riding mode to get into the uphill flow. Because that’s what Bosch has developed it for. The eMTB mode reacts progressively to you and recognizes in a flash how much power you want based on your pedal pressure – dynamically, with maximum traction and always in control. With the integrated Extended Boost, all it takes is a targeted kick on the pedal and the Drive Unit pushes you effortlessly over steps and stones.
Push assist and hill start assist
Get to your destination: Helpful functions take the weight off your eMTB when you need to stop in tricky sections. With the push assist, you can easily push your eMTB, while the Drive Unit automatically adjusts the pushing speed to the gradient and surface. In addition, the hill start assist enables a controlled and high-traction start, even on steep terrain. Hill Hold is active in both cases: your eMTB stays in place and does not roll back unexpectedly.
Compatible with Bosch eBike ABS Pro
Triumph over the trail: Bosch has developed the eBike Pro for outstanding performance. ABS Pro is ideal for professional eBikers: designed for fast, sporty downhill riding and braking. You can make full use of your braking skills and still feel how the system increases performance.
Compatible with eShift from TRP
Thanks to the electric shifting solution, you can ride to the trail with maximum relaxation and maximum performance on the trail. You can decide whether eShift with TRP should shift automatically for you or whether you want to change gear yourself on varied terrain with fast maneuvers – simply at the touch of a button. With eShift, gear changes are efficient and precise.
Optional PowerMore 250 range extender
Extend the range and enjoy even longer trail fun with the water bottle-sized energy reserve. Compact and 1.5 kilograms in weight, the range extender can be easily attached to the water bottle holder. It can be combined with all batteries in the smart system. Please find out in advance whether you can use the range extender for your eBike.
Individual riding modes
A natural riding experience is individual – with the eBike Flow app, you can create a riding mode to suit your needs. Your trail, your riding experience, your mode: With the help of four parameters, you can easily adapt the riding modes to your needs using the slider in the eBike Flow app. Support, dynamics, maximum torque and maximum speed – you decide what you need.
Powder-coated. Robust right up to the tips
The housing is made of magnesium – robust, corrosion-resistant and hard
The sealing concept prevents splash water from penetrating
The sound of the trail – nothing else: Bosch has been able to reduce the noise generated by the gearbox. The new motor is quiet. It creates a balance between power delivery and noise development
Power. Distributed over 2.8 kilograms. The Performance Line CX is around 100 grams lighter than the previous version
Bosch eBike Flow app
Extend the eBike
Use the eBike Flow app to download new functions and updates for components such as the battery or motor and send them to your eBike via Bluetooth. This keeps it up to date and gives you more options.
Record activities
Record your tour and fitness data as soon as you set off. For iPhone users, Activity Tracking also synchronizes all data automatically with Apple Health if desired. If you take a break, the recording stops automatically.
Individualize riding modes
Customize the riding mode exactly to your needs: You can fine-tune the Eco, Tour, Sport and Turbo riding modes so that they offer you more support or consume less power.
Keep an eye on everything
Get a quick overview of everything important on the home screen. Whether battery status, remaining range, distance already ridden or next service appointment – the home screen shows you everything you need to know with constantly updated eBike data.
Bosch Purion 200 Remote with integrated 1.6″ color display
Developed with ergonomics experts
Purion 200 is mounted on the left-hand side of the handlebar, close to the thumb. Thanks to its curved shape, the combination of control unit and display fits beautifully on the handlebars. If the plus and minus buttons are aligned correctly – i.e. almost vertically – this means more comfort for you when operating the system and faster reading of the riding data. You can control your eBike with just one thumb movement and change the riding mode or the display, for example. We developed Purion 200 together with the ergonomics experts from SQlab to achieve the optimum combination of functionality, comfort and design.
Optimum readability
A high resolution, greater color depth, a clear structure and easy-to-understand symbols ensure that you can quickly read and understand the information on Purion 200. The integrated ambient light sensor automatically adjusts the brightness of the display depending on the ambient light. This makes it very easy to read even in sunshine and darkness.
Powerful display combinations
If you want more information or a larger display for even better readability, you can use another display in addition to Purion 200: Have Kiox 300 or Kiox 500 fitted by a specialist dealer or use your smartphone as a second display using SmartphoneGrip and the eBike Flow app. The additional new main display is controlled via the Purion 200 buttons. Purion 200 continues to show you the information that was last selected: For example, you can display the current speed on Purion 200 while your main display navigates you.
Wide range of functions
Purion 200 offers numerous functions to help you ride and arrive better. In addition to basic functions such as switching your eBike and lights on and off, you can also activate the smart push-assist function using the Purion 200 buttons, for example, to make it easier to push your eBike when walking. At the touch of a button, you can change the display in a matter of seconds and simply select the information that is important to you at the moment: for example, keep an eye on the remaining range, see how far you have already ridden or check your cadence.
Intelligently connected
Five buttons, one display and lots of options: Purion 200 is networked in the smart system and connects the eBike to the eBike Flow app. This provides you with digital functions that you can easily activate and use via the app – e.g. for more theft protection, recording your activities or the option of adapting riding modes to your needs. In addition, Purion 200 is the interface for transferring updates to your eBike. So it always stays up to date.
Bosch PowerTube 600 / 800
Maximum range
With the PowerTube 600 / 800, long distances and many meters of altitude are easy to master.
Stylish eBike design
Like all Bosch PowerTubes, the PowerTube 600 / 800 is perfectly integrated into the frame. An attractive eBike design and high capacity – a combination without compromise. A new, lighter housing has been used for the battery. Provided the eBike manufacturer has prepared the eBike for this, it can be easily replaced – for more or less range.
Reliable energy supplier
High safety standards. Enormous mileage, long service life, reliable handling – the lithium-ion battery is equipped with a battery management system that protects the battery cells from overload.
User-friendly handling
The PowerTube 600 / 800 is characterized by particularly easy handling. The battery is always securely anchored in the frame on all tours, removal is via an intuitive, lockable mechanism and offers you user-friendly operation.
Reviews
There are no reviews yet.